One for the Poms !

Of late the DLE has put his foot down and demanded that all those "odd jobs" be completed - now. As the staff of LLC&WW failed to meet last financial years deadlines (the share holders were not happy!) all outstanding jobs were issued with a 90 day "notice of completion" deadline. Of course this most intimidating behavior  by management was dealt with in the time honoured workshop tradition and the shop steward called a stop work meeting immediately, the local watering hole was declared the most appropriate place to convene said meeting. The notice was tabled (or was that under the table ? I think that part came later) many responses from the rank and file were duly noted in the minutes, none of which are printable, there may be children reading, and a "notice of intended industrial action" (read strike) was the motion which was voted, unanimously, to be conveyed to management !

After some furious (and quite colourful to, so I have heard ) negotiations were entered into, a compromise was agreed to by all parties. The shop steward returned from the meeting, every one went quiet, he looked quite flustered, his dust coat unbuttoned and his tie was askew, his face was red (possibly leftover from the earlier stopwork meeting !?) he called everyone to order, you could of heard a pin drop, "It's the Scotsman"
he bellowed "and we've got one week to get it out of here!". Damn thing had ruptured a defraginator flange whilst on a tour down under and we were the closest workshop. We had the parts but had placed a black ban on repairing it because it was painted a non union endorsed colour !

Don't you miss the old days ?? When everyone new exactly who really ran the railways ?

Whilst the above rant may seem to be the result of the misunderstanding of the term "standard drink" it's actually the compilation of a whole bunch of stories that my Dad shared over years from his 28 years at Eveleigh workshops on the loco side. Not much inducement was required to "walk out" in the 60's and 70's. My PB in this regard was being a part of the great "there goes the brakevan" strike of '82, I think that's the right year, I really didn't care that much, as an 18 year old fireman at Thirroul, still living at home with no commitments, it was just another couple of weeks to be spent at the beach.

Whilst I'm not quite sure what triggered the above the true story here is that, probably close to a year ago, my mate Branchline Bob ( The Coolah Branch ) made me an offer I couldn't refuse. Although it pained me greatly this is not the first time I have done jobs originating from that "other" country where their love of anything that runs on rails can, but not always, go to lengths that I personally find a little disturbing. I did, however, ensure there was some Australian content and it wears the plates and head board (according to Fox transfers in the UK) that it wore whilst on tour down under may years ago. Jokes aside, the guys at Fox were excellent to deal with and I had the required etchings within a few days of the order. The level of detail and the quality of the etchings is amongst the best I have seen. The flowers on the "ornate" head board are hand painted and stand up to any scrutiny under the magnifier.

Here's the end result. I'm only responsible for the finishing. Bob built and applied the green and black to this OO scale A3 (?) DJH kit.I apologise for the 'hue' of the pic, it's the lighting in the room where I work. You will notice this on most of my bench shots.


On the level......

Those of you that follow Rod Kelly's blog , NSWGR Southern Line in a Shed, will know that he has resurrected his Laser Rail Bits line of detail/structure kits. After an absence of 7 years from the market, their return marks, in my opinion, a swing, or trend if you like, in the hobby in general.

It's no secret that, in the rolling stock area, modellers of NSW outline (and other states) have never had it so good as far as choice, detail and quality go. Some 'labels' have even drawn criticism for including too much detail on their models, citing their fragility as making them impractical for use on 'working' layouts and an alternative identical model with less detail should be offered, of lesser cost of course. The reality here is that the number of detail items inculded on a model makes very little, if any at all, difference to the shelf price of a a singular model.

While some may lament this as the 'the end of the kit as we know it' era, something that would initiate active debate between those of either opinion, I see it as the start, or  restart, of the emphasis on detail(s) of the layout, both home and club, as well as exhibition.

Over the couple of decades that I have been attending exhibitions the emphasis has, generally, been on the models rolling through the varied landscapes. There are of course exceptions to this and some individuals and groups raised the bar to to new levels in both aspects. While the standard in rolling stock remains high in the majority of cases, it is the quality of scenery and the detail which has been making steady upward progress over the last few years. It was with this in mind that myself, when I recently became aware of it when I discovered his blog, and others, have encouraged Rod to start (again) manufacturing his range of laser cut/etched timber detailing parts.

Rod sent me a selection of level crossing kits which covers what amounts to single lane and dual lane crossings in either brand new or reclaimed sleepers. The outline appears indentical, apart from the size of course, but the etching detail is what creates the difference between new and reclaimed. The etching detail is what is the standout for me. In the reclaimed version the outline of sleeper plate wear and spike hole is quite evident and even after I applied 'distressing' with a #11 blade and stained the crossing using a Tamiya wash of grey and then black, was still quite visible. One thing which initially caused me some 'distress' was after applying the weathering wash the entire crossing curled up, almost resembling a dried out hotdog bun ! Well that's interesting, I thought, however applying a small amount of Tamiya thinners to the opposite side soon encouraged the crossing to flaten out again and it stayed that way, thankfully! It may well have flattend out by itself, in time, working with timber this thin is something new to me.

The pic show the crossing installed, very quickly, at Kankool Perway depot on Werris Ck. The other crossing was done using timber 'sleepers' from a different manufacturer. As you can see they are a tad overscale and don't produce the same result as the Laser Bits crossing. Installation was simply a few drops of PVA on the back of each component and place, followed by 'backfilling' with fine ballast and dirt. The distressing and weathering (staining) took about 15 minutes. Do this a little at a time as 'unstaining' basswood is an art that I'm yet to master !

With any of the Laser Rail Kits accuracy is paramount. Rod researches everything he does, in person where humanly possible. Most of all he is after feedback, good, bad or otherwise, and ideas from modellers for future projects. He has some great stuff in the pipeline and all it will take is some support from the modelling community (and enough hours in the day and a reliable source of suitable timber) for these projects to become a reality.

Have a look at Rods blog for more pics and info on planned kits and check out his Ebay store for whats available now.

The installed crossing compared to its predecessor.

Here's one of the "main street" of Breeza on the Creek - because I could !


Convention 29 - 2012 Forms

Information and registration forms have been posted on the Convention blog . These can be printed as per the instructions for submission.

Everyone on the mailing list should receive forms in the next day or so as they were posted on Saturday.

With one of our largest presenter lists as well as commercial traders and demonstrations we are really looking forward to an increase in numbers from last year.

Once again the cost has remained the same at $55, including notes, with discounts for eligible students.

Look forward to seeing you there.


(Now maybe I can get some modelling done!!)


Convention 29 - 2012 update

Modelling the Railways of NSW Convention 29 - 2012 has been updated with a full list of presenters and demonstrators. The program is larger and more varied than it has been for while so take a look and work out what presentations you will be signing up for !

In the not too distant future all the relevant information and registration forms will be posted on the MRNSW blog for downloading and printing along with any other relevant information.

See you there.....



Mini Milestone !

Well it was to me anyway !

Last weekend No 1 son moved the last of his car crap out of the cave. One very full 7x4 box trailer and half a Jackaroo later the only contents are now my own.

Over the next week I hope to evict anything else that I am able to determine will have no future part of Cambewarra and make a date with some local gyprockers and get things moving ahead again.

Due to training courses and covering sickies at work lately I havn't gone near the work bench for so long I'm not even sure where it is ! Even had to bail out of a "Friday night fix" last week at the last minute due to work, that hurt !

Will keep you posted.


Convention 29 - 2012 update

There has been an update to the Convention blog at http://mrnsw.blogspot.com.au/


Modelling the Railways of NSW Convention 29 -2012

Detailsof the convention can be found at http://mrnsw.blogspot.com.au/

Have a look and pass it on !


Welcome 2012....shall we try that again !

Yeah I know, New Years was last month, but everything else has been running on a late table lately....

Even though the dust from 2011 has not quite settled yet I have forced myself back to the workbench in an effort to do something that does not involve solicitors, probate and certified copies of just about any document you care to name. It's not over yet, but the end is in sight at last.

So what's been happening? The Cave has ground to a resounding halt, this is particularly depressing as the one thing I didn't want to happen has, I have been forced by circumstance to partially fill it with "stuff". The wiring has been roughed in, this insulation is now finished but unfortunately there is not enough space for the gyprockers' to do there thing. I hope to rectify this over the coming months. Stay tuned.

I am trying to finish off a number of partly completed projects at the moment, all of which are for other people, I appreciate their patience. This is a strange collection of projects which includes a DJH OO scale LNER A3 Pacific, usually referred to (incorrectly I'm told) as a 'Scottsman'. Although built with a coat of green I am applying decals and other decorations. Also finishing off a partly rebuilt Lima 42 class, this will include detail items and paint work. Why you ask ?, because this model has particular sentimental value to the owner that a new 42 cannot replace.

The other project is an Antons Trains double boiler house which will eventually reside at Kankool on Werris Ck. This model forms part of the "Adopt a Station" programme amongst the Friday night Ramblers. I have built a few small structures over the years but this is by far the most ambitious.

Another fairly significant point I believe that I have reached is deciding on what 'format' my layout will take and maybe even a name for it. I have agonised for so long and changed my mind so may times that getting to a point where I have stopped changing my mind is even significant !
In short, it will be a single line, double deck layout with two opposing peninsulas.
The two levels will be connected by single long gradient which, at the halfway point, will have a crossing facility based on Dombarton, found on the Unanderra - Moss Vale line on the NSW Sth Coast. This is significant to me because I ran over this line for may years and even sat my Class 1 Enginemans exam whilst waiting to cross a train there. It will also provide a basis for bank engine working as well.
I use the term 'based on' because the location of the layout will be fictitious whilst trying to capture different aspects of various areas I worked trains over.
A major station on the layout will include features found at Thirroul over the years, but not exactly. A station, loco depot, yard and colliery in close proximity with a signal box at each end.
The lower level will have a coastal feel while the upper level will be more arid or western. The only feature I have decided on up there is that a terminus station based on Gwabegar will feature.
As for a name, Cambewarra Range.... at this stage. What if the link to the south west was a right turn at Bomaderry instead of Unanderra?? This area has some great locality names and a mine or two, it's also a favorite holiday destination of ours as well. I like the idea of having a connection to the area of choice when modelling.

Looking forward to some progress this year and whatever challenges it throws up. Glad to see the back of 2011 and hoping to be able to put most of it behind me. Thanks again to those of you who supported me through it. I look forward to following your progress as well this year.